![]() ![]() ![]() ![]() Now if your 22 KHz switch is not working on that LNB then all you need to do is use an external one and run coax from the outputs of the LNB to it, or you can use a Diseqc switch, but be sure to cap off the input port on the "C" band side or it could get water into it. Like this : (these are my settings for AMC-1 using an OpenBox X5 receiver, yours will/may be different) ![]() LNB frequency settings are 10750 for the "kU" band and 5150 for the "C" band.įor some receivers you can't use both LNB frequency's on one satellite setup, so you have to do a custom setting for each band if that satellite has both "C" and "kU" bands on it. That LNB does not use a Diseqc switch, but an internal 22 KHz switch, as I use that brand of LNB, 22 KHz on in your setup menu will get you to the "kU" band side, 22 KHz off will get you to the "C" band side. Position: 78.5☎ (Ku band) Frequency: 12355 H 30000 2/3: TVPool: 2600:000000:0197:00CF:1FFF::67 52 86 3F BD 55 AA BC 67 52 86 3F BD 55 AA BC: Position: 78.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |